Moin,
ich habe da ein kleines Problem.
Der System Profiler sagt:
SMART Utility 3.0.2 zeigt mir:
In iFixit lese ich:
Sonst wird auch allgemein dem Anschlusskabel die Schuld gegeben.
Allerdings ist der Fehler zuletzt vor ca. 600 Std. aufgetreten und die HD ist auch nicht mehr die jüngste.
Was meint ihr?
Bei Gelegenheit mal HD & Kabel auswechseln?
ich habe da ein kleines Problem.
Der System Profiler sagt:
FUJITSU MHV2100AT
S.M.A.R.T.-Status: Überprüft
S.M.A.R.T.-Status: Überprüft
Error Count: 81
Error Log:
Error 81 occured at disk power-on lifetime: 30709 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 08 00 E0
Error: Interface CRC error, Interface CRC error
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
CA 00 01 01 08 00 E0 08 00:01:52.973 WRITE DMA
F8 00 00 00 00 00 E0 08 00:01:52.972 READ NATIVE MAX ADDRESS
EC 00 00 00 00 00 A0 0A 00:01:52.964 IDENTIFY DEVICE
EF 03 44 00 00 00 A0 0A 00:01:52.957 SET FEATURES [Set transfer mode]
F8 00 00 00 00 00 E0 08 00:01:52.956 READ NATIVE MAX ADDRESS
Error Log:
Error 81 occured at disk power-on lifetime: 30709 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 08 00 E0
Error: Interface CRC error, Interface CRC error
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
CA 00 01 01 08 00 E0 08 00:01:52.973 WRITE DMA
F8 00 00 00 00 00 E0 08 00:01:52.972 READ NATIVE MAX ADDRESS
EC 00 00 00 00 00 A0 0A 00:01:52.964 IDENTIFY DEVICE
EF 03 44 00 00 00 A0 0A 00:01:52.957 SET FEATURES [Set transfer mode]
F8 00 00 00 00 00 E0 08 00:01:52.956 READ NATIVE MAX ADDRESS
CRC and input errors refer to Layer 1 issues could be a faulty port or cable, check them first, else its the drive.
Allerdings ist der Fehler zuletzt vor ca. 600 Std. aufgetreten und die HD ist auch nicht mehr die jüngste.
Was meint ihr?
Bei Gelegenheit mal HD & Kabel auswechseln?
Comment